nanoDefense^™ is a recognizable, replaceable film substrate that has a proprietary coating which activates in the presence of light to create a self cleaning surface. It is intended for use on high touch surfaces in lighted areas where the coating works to continuously to remove contaminants.

One of the components of the coating is a mineral called titanium dioxide. Titanium dioxide acts as a photocatalyst, when activated by light. This photocatalytic effect produces Hydroxl radicals that have 2 times the oxidizing power of bleach. This oxidation breaks down organic contaminants at the cellular level into harmless byproducts.

The nanoDefense^™ surface continuously oxidizes organic contaminants at the cellular level. It is important to remember that light must be able to reach the surface for the process to work. Wiping away anything that would prevent light from reaching the film will allow nanoDefenseTM to continuously self clean.

nanoDefense^™ surfaces are not affected by traditional non-abrasive cleaners or detergents. We recommend wiping the surface with a non-abrasive cloth and water to remove large-scale contaminants. Do not use harsh cleaners, detergents, or abrasive cleaning utensils that will compromise the coated surface.

All facilities have areas within them that get touched or used more frequently than others. INDUSTRIAL Grade nanoDefense^™ products are designed to be used in high traffic areas where the surfaces would be touched regularly. The INDUSTRIAL Grade products have longer lasting coatings and are more abrasion resistant. The INDUSTRIAL Grade products will last longer between replacements than the Professional Grade which are intended for low to medium traffic areas.

We recommend replacing nanoDefense^™ products quarterly at a minimum. The nanoDefense^™ surface does not expire, so the product has a very long lasting shelf life. The product service life is solely dependent on actual physical wear and tear that gradually removes and reduces the effectiveness of the coating.

Beyond the recommendation to replace nanoDefense^™ products quarterly the print on nanoDefense^™ products can serve as a wear indicator. If the text or graphics become worn or faded, the coated surface is also becoming worn and it’s time to replace. Also, if the nanoDefense^™ film starts to peel off, we recommend replacement to keep the touch point free from contaminants.